标准编号 标准中文名称 标准英文名称
GB/T18689-2002 农业灌溉设备小型手动塑料阀 Agricultural irrigation equipment--
Manuallyoperatedsmall plastics valves
NF T54-082-1988 塑料.热固塑料阀.耐压和密封性试验 (PLASTICS. THERMOPLASTIC AND
THERMOSETTINGVALVES. TEST OF RESISTANCE
TO PRESSURE.)
BS EN 1704-1997 塑料管道系统.热塑塑料阀. (Plastics piping systems - Thermoplastics
弯曲情况下温度循环后阀门完整性的试验方法 valves - Test method for the integrity of a
valve after temperature cycling under bending)
EN 28233-1990 热塑性塑料阀门 扭矩 试验方法 Thermoplastics valves- Torque; test method
(ISO8233:1988)
EN 28659-1990 热塑性塑料阀门 疲劳强度 试验方法 Thermoplastic valves- Fatigue strength- Test method (ISO 8659:1989)
BS EN 28233-1992 热塑性塑料阀门的扭矩试验方法 (Thermoplastics valves - Torque - Test method)
BS EN 28659-1992 热塑性塑料阀门.疲劳强度.试验方法 (Thermoplastics valves - Fatigue strength - Test method)
ISO 7349-1983 热塑塑料阀.连接基准 (Thermoplastics valves; Connection references)
ISO 8659-1989 热塑塑料阀门.疲劳强度.试验方法 (Thermoplastics valves; fatigue strength; test method)
ISO 8233-1988 热塑塑料阀门.扭矩.测试方法 (Thermoplastics valves; torque; test method)
ISO 9393-2 Technical Corrigendum 1-1997 热塑性塑料阀门.压力试验方法和要求.第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和 (Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves; Technical Corrigendum 1)
ISO 9393-1-1994 热塑性塑料阀门.压力试验方法.第1部分:总则 (Thermoplastics valves - Pressure test methods and requirements - Part 1: General)
ISO 9393-2-1997 热塑性塑料阀门.压力试验方法和要求.第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和 (Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves)
ISO 9911-1993 农业灌溉设备.手工操做小型塑料阀门 (Agricultural irrigation equipment; manually operated small plastics valves)
This region has not yet joined our new website. You will now continue to the existing site for 开云手机入口-开云(中国)